Jessie Daye

View Original

DIY Succulent Letter

DIY Succulent Letters


What you need
Cardboard Letter(s) from Michaels or Amazon or just a Cardboard Box
TrashBag
Glue
Scissors
X-acto Knife
Succulents
Cactus Soil

Directions
1. Use your X-acto knife to cut one side of the letter off, leaving about 1/4" trim around the letter like tin the picture above. If you are making this with a cardboard box you will need to cut out your letter and then hot glue 2-3 inch cardboard trim around your letter from scrap cardboard.

2. Remove the card board from inside and apply glue along the bottom and sides of the inside of the letter. Apply trash bag to the entire inside and spread it out and get into all the crevices and let dry. 

3. Trim the trash bag along the edge of the letter so it does not show and discard the portion you cut off. Fill with soil and succulents.